Jiangsu Profile
Product List
251146. Kwikstage Scaffolding Standard with Spigot 
[Sep 15, 2017]
[Sep 15, 2017] Standards The Standard is the vertical member of the scaffold with a spigot at one end for accurate alignment. A series of 'V' locating lugs are welded on the tube for the attachement of ledgers, transoms, and ...
251147. BS Type Drop Forged Scaffolding Double Coupler [Jul 29, 2017]
[Jul 29, 2017] Forged Double Coupler Drop Forged Double Couplers are made of Q235 Carbon Steel according to BS 1139 or EN 74 standards. Electrogalvanzied or hot dip galvanized available. Used to connect two scaffolding tube in ...
251148. Galvanized Scaffolding Tube for Tube & Couplers [Jul 29, 2017]
[Jul 29, 2017] EN39/BS1139 galvanized scaffolding pipe/tube Out Diameter: 48.3mm-48.6mm Thickness: 2.0mm-4.0mm Steel Grade: Q235B, Q345B, S235JR, S275JR, STK400, STK500 Standard: BS1139-1775, EN39, JIS G3444, BS 1387 Surface ...
251149. Common Readylock Transom for Scaffolding Tube and Fittings [Jul 29, 2017]
[Jul 29, 2017] Common Readylock Transom Fixed length and semi-rigid end connection facilitates efficient setting out and self alignment and thereby saves labours. Reduced number of site fixings saves labour. Partially fixed ...
251150. Truss Ledger for Cuplock Scaffolding System [Jul 29, 2017]
[Jul 29, 2017] Truss Ledger Made of high strength steel tube Q345 with galvanized finish Reinforced components to improve the loading capacity
251151. Side Bracket for Cuplock Scaffolding System [Jul 29, 2017]
[Jul 29, 2017] Side Bracket Designed to increase the overall width of the working platform by supporting additional boards beyond the inner face of the scaffolding. They incoporate a cup joint at the outside end to allow the fitting ...
251152. Ledger for Kwikstage Scaffolding System [Mar 29, 2017]
[Mar 29, 2017] Ledgers The Ledger is used to connect the standard in a longitudinal direction. It is made from scaffolding tube with wedge 'Banana Type' fixing at each end which fits in the 'V' locating lugs on the standard. The ...
251153. Kwikstage Scaffolding Angle Bar Transom [Mar 29, 2017]
[Mar 29, 2017] Transom Transom is either made of back-to-back angle bar or T-shaped profile with the same fixing device on each end as the ledger. They are used to carry 3 or 5 numbers of steel or trimber battens and toe board.
